Details of Koforidua Technical University Cut off points 2018
Details of Koforidua Technical University Cut off points 2018; Get cut off points and admission requirements before you apply.
The University currently uses the standard cut off point of SSSCE aggregate 36 or better; WASSCE aggregate 24 or better; the ‘O’ and ‘A’ levels as well as the GBCE/ABCE qualifications to admit qualified applicant. The Faculties have also additional requirement to be satisfied by the applicant
Koforidua Technical University Cut off points 2017. This cut-off point is difficult to get even from the school.
According Koforidua Technical University, cut off points are only used when a lot of people apply for a particular program.
In effect, the school does no have any standard cut-off points. The admission requirements are rather used instead of the cut of points.
Below is the Koforidua Technical University admission requirements for you
ENTRY REQUIREMENTS FOR BACHELOR OF TECHNOLOGY PROGRAMMES
(I) BACHELOR OF TECHNOLOGY (B.TECH) IN ACCOUNTING – (2 YEARS TOP-UP PROGRAMME)
i. Graduates of Higher National Diploma (HND) in Accounting and students transferring from similar programmes run at other accredited/recognized institutions with a minimum of Second (2nd) Class Lower Division plus at least one (1) year working experience. OR
ii. Applicants with Level II qualification of ICA-Gh and ACCA Foundation (F1 to F9) or CIMA Level II examinations. OR
iii. HND Graduates with passes lower than the minimum Second (2nd) Class Lower Division requirement indicated above but have worked in relevant fields for at least one (1) year may apply. Such applicants will be admitted based on interview performance. OR
iv. HND graduates from other fields or disciplines with a qualification lower than the minimum Second (2nd) Class Lower Division requirement with at least one (1) year working experience in accounting related fields.
(II) B.TECH. IN PROCUREMENT AND SUPPLY CHAIN MANAGEMENT – (2 YEARS TOP-UP PROGRAMME)
i. HND graduates in Purchasing and Supply, HND Building Technology and students transferring from similar programmes run at other accredited institutions with a minimum of Second (2nd) Class Lower Division plus at least one (1) year working experience. Or
ii. Applicants with Level 4 Foundation Diploma of Chartered Institute of Purchasing & Supply (CIPS-UK) qualifications or equivalent of Chartered Institute of Builders, UK may apply. Or
iii. HND graduates with passes lower than the minimum 2nd Class Lower Division requirement indicated above but have worked in relevant fields for at least one (1) year may apply. Such applicants will be admitted based on interview performance. Or
iv. HND graduates from other fields or disciplines with a qualification not lower than the minimum 2nd Class Lower Division requirement with at least one (1) year working experience in procurement related fields.
(III) BACHELOR OF TECHNOLOGY (B.TECH) IN SECRETARYSHIP AND MANAGEMENT STUDIES – (2 YEARS TOP-UP PROGRAMME)
i. Graduates of Higher National Diploma (HND) in Secretaryship and Management Studies and students transferring from similar programmes run at other accredited/recognized institutions with minimum of Second (2nd) Class Lower Division plus at least one (1) year relevant post qualification experience in the relevant field. Or
ii. Applicants with Private Secretaryship Certificate who have one (1) year working experience in secretarial field shall be admitted after passing a qualifying examination. Or
iii. Applicants with level one (1) qualification of the Institute of Chartered Secretaries and Administrators (ICSA) qualifying examinations. Such applicants (ICSA applicants) shall be admitted based on an entrance examination and interview performance. Or
iv. HND Secretaryship and Management Studies graduates with passes lower than the minimum Second (2nd) Class Lower Division requirement indicated above but have worked in relevant fields for at least two (2) years may apply. Such applicants will be admitted based on interview performance. Or
v. Other HND graduates from other related fields of disciplines with a qualification lower than the minimum Second (2nd) Class Lower Division with at least five (5) years working experience in Secretaryship related fields. Such applicants shall be admitted based on interview performance.
(IV) BACHELOR OF TECHNOLOGY (B.TECH) IN MARKETING– (18 MONTHS TOP-UP PROGRAMME)
i. HND graduates in Marketing, and students transferring from similar/related programmes run at other accredited institutions with a minimum of Second (2nd) Class Lower Division plus at least one (1) year working experience. Or
ii. Applicants with professional Diploma from CIM (UK/Ghana) Or
iii. HND graduates with passes lower than the minimum 2nd Class Lower Division requirement indicated above but have worked in relevant fields for at least one (1) year may apply. Such applicants will be admitted based on interview performance. Or
iv. HND graduates from other fields or disciplines with a qualification not lower than the minimum 2nd Class Lower Division requirement with at least one (1) year working experience in Marketing related fields.
(V) BACHELOR OF TECHNOLOGY IN AUTOMOTIVE ENGINEERING – (2 YEARS TOP-UP PROGRAMME)
i. HND Automotive Engineering, HND Mechanical Engineering (Plant and Production Options) with at least Second (2nd) Class Lower Division plus a minimum of one (1) year post-HND relevant industrial experience in an automobile or related field. Or
ii. KNUST Diploma plus a minimum of one (1) year post-Diploma relevant industrial experience in an automobile or related field.
iii. City and Guilds of London Institute (Part III)
iv. Motor Vehicle Technician Part III (MVT III)
(VI) BACHELOR OF TECHNOLOGY IN BUILDING TECHNOLOGY – (2 YEARS TOP-UP PROGRAMME)
i. HND graduates with a minimum of Second (2nd) Class Lower Division in Building Technology or Civil Engineering. Or
ii. HND Graduates with passes lower than the minimum Second (2nd) Class Lower Division requirement indicated above must pass a selection interview to be conducted by the University. Or
iii. Holders of Construction Technician Part III. Or
iv. Holders of Construction Technician Part II (old scheme)
(VII) BACHELOR OF TECHNOLOGY (B.TECH.) IN CIVIL ENGINEERING –(2 YEARS TOP-UP PROGRAMME)
i. HND graduates with a minimum of Second (2nd) Class Lower Division in Civil Engineering or Building Technology. Or
ii. HND Graduates with passes lower than the minimum Second (2nd) Class Lower Division requirement indicated above must pass a selection interview to be conducted by the University. Or
iii. Holders of Construction Technician Part III. Or
iv. Holders of Construction Technician Part II (old scheme)
(VIII) BACHELOR OF TECHNOLOGY IN RENEWABLE ENERGY SYSTEMS ENGINEERING – (2 YEARS TOP-UP PROGRAMME)
i. Entry is limited to holders of at least Second (2nd) Class Lower Certificate in Higher National Diploma (HND) in Renewable Energy Systems Engineering or HND Mechanical Engineering (Production and Plant options) Or
ii. HND in Electrical/Electronics Engineering or Chemical Engineering. Equivalent entry requirements are the KNUST Diploma in Mechanical Engineering/Physics. In addition, applicants must have at least one (1) year relevant industrial experience in an energy related field.
(IX) BACHELOR OF TECHNOLOGY IN TELECOM ENGINEERING – (2 YEARS TOP-UP PROGRAMME)
i. Graduates of Higher National Diploma (HND) in Electrical/Electronics Engineering or Computer Science and students transferring from similar programmes ran at other accredited/recognized institutions with a minimum of 2nd Class Lower Division plus at least one (1) year working/industrial experience. HND Computer Science certificate holders without appropriate course content in Electrical/Electronics technology in their programme will be required to do the requisite bridging courses. Or
ii. Applicants with Diploma in Electrical and Electronic related courses from recognized institutions with a minimum of one (1) year industrial working experience. Or
iii. Foreign students with qualifications equivalent to Ghana HND Electrical/Electronics Engineering certificate. Or
iv. Holders of Electrical/Electronics Engineering Technician Part III
(X) BACHELOR OF TECHNOLOGY IN MECHANICAL ENGINEERING –(2 YEARS TOP-UP PROGRAMME)
i. HND Mechanical Engineering (Plant or Production Options) with at least Second (2nd) Class Lower Division plus a minimum of One (1) year post-HND relevant industrial experience in a Mechanical or related field. Or
ii. HND Graduates with passes lower than the minimum Second (2nd) Class Lower Division requirement indicated above must pass a selection interview to be conducted by the University.
Other Recognized Diplomas
i. Mechanical Engineering Technician Part III (MET III)
ii. KNUST Diploma in Mechanical Engineering plus a minimum of one (1) year post-Diploma relevant industrial experience in a Mechanical or related field.
(XI)BACHELOR OF TECHNOLOGY (B.TECH) IN APPLIED STATISTICS (FINANCIAL STATISTICS OPTION) – (2 YEARS TOP-UP PROGRAMME)
i. Applicants must have HND (First Class or Second Class Upper Division) in Statistics with a minimum of two years working experience. Applicants with Second Class Lower Division will have to attend and pass an interview.
ii. Diploma qualifications from elsewhere assessed to be equivalent to HND may be similarly considered.
(XII) BACHELOR OF SCIENCE IN COMPUTER SCIENCE
i. Applicants with Higher National Diploma (HND) in the following areas with a minimum of 2nd Class Lower Division are eligible to apply:
ii. Also, applicants with Electrical Engineering Technician Part III (EET III) may also apply
(XIII) BACHELOR OF SCIENCE IN INFORMATION TECHNOLOGY
Applicants with Higher National Diploma (HND) in the following areas with a minimum of 2nd Class Lower Division are eligible to apply:
E. ACCESS COURSE /PRE-HND PROGRAMME
The National Board for Professional and Technicians Examinations (NABPTEX) has designed an access course for Technical/Vocational Institute graduates into HND Programmes. NABPTEX will conduct a final external examination after which successful applicants shall proceed to enroll in the under listed HND PROGRAMMES:
Duration – One (1) academic year (i.e. Two (2) semesters of 16 weeks per semester)
Note: Candidates would be required to obtain at least 50% in each of the three (3) subjects namely: English Language, Mathematics and Science.
ENTRY REQUIREMENTS
i. Applicants must have a minimum of Craft Course. Or
ii. Applicants must have MET I, MVT I and EET I or its equivalent. Or
iii. Applicants should have a minimum qualification of Intermediate or Craft Certificate or its equivalent from a recognized examinations body. With regards to Hospitality Management, applicants must have Cookery 812/2.
F. PROFESSIONAL PROGRAMMES
The University has re-introduced the following professional programmes to be run on WEEKENDS on the main campus of the polytechnic.
To qualify to write any of the professional examinations above, the candidate SHOULD first register as a student of an appropriate professional body.
Entry Requirements: The basic educational qualifications include:
• PART I:
REGULAR ENTRY:
5 GCE ‘O’ Level credits or 5 RSA II or 5 GBCE or
5 WASSCE/SSSCE passes including English Language and Mathematics. PLUS any of the following:
• 3 ‘A’ Level passes with at least a grade ‘D’ in one subject excluding General Paper Or
• 3 RSA III Or LCCI III or 3 ABCE or DBS in relevant subject areas Or
• HND in relevant subject areas Or
• Post- Secondary Certificate Or
i. A very good first degree in a relevant subject area from a recognized tertiary institution Or
ii. 6 Passes at WASSCE with at least aggregate 20 including English and Mathematics
iii. A Masters degree in a relevant subject area from a recognized tertiary institution Or
iv. 6 GBCE with at least aggregate 20 and including English and Mathematics
v. Mature Applicants should be 25years of age minimum and must possess the relevant basic academic qualification.
EXEMPTIONS
Exemptions may be granted in appropriate papers at Levels I &II to deserving applicants with relevant qualifications.
Study time: Friday 5.30pm – 8.30pm Saturday 6.00am- 5.00pm Sunday 6.00am-2.00pm
Duration: Four (4) months for every level
G) CERTIFICATE PROGRAMME IN SMALL AND MEDIUM ENTERPRISES – 3 MONTHS (SATURDAYS ONLY)
ENTRY REQUIREMENT
(i) Applicants with a minimum of Junior High School Certificate
(ii) Mature Applicants must be at least twenty-five (25) years old and must have relevant working experience.
Applicants can only apply online via Koforidua Technical University online application portal.